Submit your review

Create your own review

Head Gasket Repair - Steel Seal
Average rating:  
 4 reviews
by Ned on Head Gasket Repair - Steel Seal
Strait six sealed

This is the first time I have used Steel Seal and can confirm it worked for me. There was back pressure and white smoke from the exhaust, and all the usual signs of a head gasket breach as well as the car being off a cylinder. Being a straight six engine I was informed it would take two bottles for the job in hand, so I poured in both bottles with plenty of room in the cooling system as I thought. Started and run the engine for a while but the problem was the water level was too high so the engine just presurised again. I checked the web site and noticed that if this occurred the expansion bottle would have to be drained and radiator cap left off .So I did that and tried again .The result is, after changing a plug which was burned and left the engine still off a cylinder, the problem was cured. I have been driving the car ever since with no problems. Note.. Make sure you empty the overflow bottle to let the product get to the problem. This stuff really works!!

by Tobias on Head Gasket Repair - Steel Seal
Very happy so far

"I believe my cylinder head is suffering from the well known Porous / Cracked cylinder head. I was losing coolant after 5 min drive unless I fully heated up the engine first and even when I had I’d still lose coolant if I sat in the Rev range for the turbo to kick in.
If I pulled over the coolant reservoir would be nearly empty or completely empty then I’d open the cap and it would suddenly fill up due to back pressure.
I suffered this for 3 weeks stopping 5-6 times on the way to work.
The part I needed was going to cost £840 if I fitted it myself or Vw wanted £2400 so I was saving for the part when I came across steel seal.
I seriously had my doubts about the product as I have used similar in the past wich have clogged up the coolant system resulting in more issues.
But after a bit of reading on how it works I decide to give steel seal a go.

It’s now only 4 days later but I have not lost any coolant yet and my car has more power than it has had since I owned it for the last 7 months.

I will be keeping an eye on the coolant levels daily still and also changing the cylinder head when I have the funds but steel seal has definitely brought me more time to save if it for some reason does fail."

by Dan on Head Gasket Repair - Steel Seal
The Real Deal

i was about to consider my car totaled. It wasn't worth the cost of spending 1500-2000$ for the repairs. I was a Youtuber named Scotty Kilmer recommend this product. I researched it for a few hours and like most of what i heard and seen. It was kinda expensive, i will say that, but for 80-90$ if the product did what it claimed to do it would totally be worth it.....sure as sh@t it worth liked a charm. I never do online reviews for products but i just had to with this product. It's like magic. Just be sure to follow all the directions closely(change out bad coolent, replace with fresh water, do an oil change before usuing product etc). If you do all that and your gasket is completly smoked than the product is almost sure to work. HIGHLY RECOMMENED!!

by Matt Nicoson on Head Gasket Repair - Steel Seal
Old Pontiac Revived

My reliable Pontiac Aztek has over 250,000 miles on it but still looks good and was running fine when it started overheating. Diagnosis from 2 mechanics was blown head gasket. Thermostat is fine, hoses are fine, fan working fine... They wanted $1500-$1700 to replace (mostly labor of course). Could not justfiy spending that so was pondering just scrapping it out but really wanted to keep it running. Saw the ad for Steel Seal and was skeptical but for the cost I figured I had nothing to lose. Followed the instructions and other tips in several YouTube videos and evidently it worked because it has been running fine for 3 days now! Very Happy I tried it out!